Thiết bị đo clo dư online

Liên hệ

Free residual chlorine analyser series M 1035 C is designed for measurement and control of drinking water, wastewater treatment and swimming-pool applications.

Nhập khẩu và phân phối bởi Công ty Minh Châu
Danh mục:

Free residual chlorine analyser series M 1035 C is designed for measurement and control of drinking water, wastewater treatment and swimming-pool applications.

Two basic measured parameters are free chlorine and temperature.

Measuring range 0 – 5 mg/l

KEY FEATURES

  • 2 measuring electrodes gold/copper + reference electrode (optional)
  • continuous measuring: free chlorine
  • stable measurement— open flow measurement cell with a constant flow
  • continuous cleaning of measuring electrodes by stepper motor
  • insight in measurement cell parameters for rapid detection of interfering substances
  • modular electronics for simple service
  • alarm for measuring cell or regulation errors
  • canbus communication to easily connect several units to the control unit
  • clear graphical display for all measured parameters

GENERAL

Free residual chlorine analyser series M 1035 C is designed for measurement and control of drinking water, wastewater treatment and swimming-pool applications.

Two basic measured parameters are free chlorine and temperature.

The unit enables the construction of additional expansion modules, for measuring the pH value and the redox potential (for drinking and wastewater).

Amperometric measurement method using two electrodes and an additional third reference electrode provides constant and continuous measurements.

The unit consists of the following subassemblies:

· a mechanical filter sample

· an indicator of the flow of the sample

· self-cleaning measuring cell

· measurement – regulation electronics

· cover

User interface for parameterization and calibration is performed via graphical LCD display.

Control, regulation and control of disinfection processes are enabled by analog and digital outputs and the CANbus digital communication. The control module supports the connection of actuators – dosing pump with analog and digital inputs as well as solenoid and motorized valves – for two-point and continuous dosing.

Software design of the control module contains a number of protective mechanisms against overdosing.

Download Catalogue