MÁY CHÂM CLO

Differential pressure regulators are designed to stabilize vacuum. They are used in gas chlorine installations, with minor alterations they can also be used for other gases. They are made of the best and most resistant materials. The springs are made of tantalum alloys, housing from special ABS plastic or rigid massive PVC, the diaphragms, O-rings, gaskets and washers are made of quality materials like ECTFE foil, FPM/FKM, PTFE (TEFLON), PVDF, which all ensures faultless operation of these devices at high mechanical and temperature load.

The MR 500 RC series chlorinator system is used for accurate feed of gas chlorine, sulphur dioxide and other gases in water supplies, wastewater treatment plants and industry.

The MR 21 RC Chlorinator System is designed for dosing gas chlorine and with minor alterations, also other gases, working on the indirect vacuum principle.

The MR 40 RC Chlorinator System is designed for dosing gas chlorine and with minor alterations, also other gases, working on the indirect vacuum principle.

Vacuum Regulators are a part of chlorination system, designed for dosing gas chlorine and with minor alterations also other gases, working on the indirect vacuum principle.

The chlorine gas filters series M 3319 are designed to purify chlorine gas in order to avoid damages on the feed unit, particularly the sensitive parts like valve seats and rate valves. Additionally, the filter evaporates liquid rests together with the heater wrapped around it.

Chlorinator System M 30 RC is designed for direct feed of gaseous chlorine under pressure, e. g. for open swimming pools and tanks at locations where it is not possible to provide an auxiliary power supply. The capacities of the device vary from 0 – 2000 g/h, functioning on the principle of pressure in the chlorine cylinder with manual feed rate adjustment.